Brita vs. PUR: Which Is The Better Water Filter?
What’s the difference between Brita and PUR? Which is better for you? Brita and PUR are two of the most popular water filter brands on the market. They both have their advantages, but depending on what you’re looking for in a water filter, one may be more suitable than the other. Let’s take a look at some of their differences below!
The first thing to consider when trying to decide whether you want a particular type of product is what your needs are. Are you interested in something that will allow for healthier drinking or cooking? Do you need filtered water because your pipes contain lead? There are many different reasons why someone might want a water filtration system, so it pays to do some research before buying anything!
What is a water filter?
What is a water filter? A water filter takes impurities from your tap water and converts it into a clean substance without removing any of the essential minerals your body needs. This system will also help to keep your family healthy as well. Since most tap water nowadays contains a variety of pollutants from chemicals, pesticides, to other contaminants, having one can mean the difference between a healthy diet and an unhealthy one.
What is a water purification process used in these systems? A water purification process involves two steps. The first step is to remove the contaminants that are present in the contaminated water. This usually involves putting the source water into a pre-filter that will block chemicals, pesticides, toluene, and other contaminants. The second step is to use a residential water purification system that can effectively filter out the remaining impurities and leave the valuable minerals intact.
Why would I want to purchase a water system for my house? If you want to have clean, soft water at all times, then a water purification system is the solution for you. Most municipal water systems only treat a portion of the city’s water supply. This leaves many areas of the city with raw, hard water that can be unsafe and unhealthy. However, by purchasing a water treatment system that can filter both the hard and soft water supply, you can have clean, healthy water all the time.
What are some types of water filters work best? Activated carbon filters are probably some of the most common filters used today. These filters use activated carbon to trap contaminants and change them into liquid form. In addition to using activated carbon to absorb water contaminants, some filtration systems include a second filtering material to remove contaminants that aren’t trapped by the activated carbon. Some systems even include a third filtering material to help eliminate other chemicals and heavy metals from the water.
What are some common filtration methods? The two most common types of filtration systems are reverse osmosis and ion exchange. Reverse osmosis uses a pressurized water supply to pass through a series of filter columns. These filter columns are designed to remove contaminants, such as iron, sulfur, manganese, and others. Ion exchange involves passing water through bead-like resin media, which traps chemicals or ions in the water, and changing the charge of the ions.
Do I need a water test to know what contaminants are in my tap water? No, not necessarily. But if you want to be sure, you can purchase a home water test kit. These kits give you results for every contaminant that are present in your tap water, as well as the volume and percentage for each contaminant. They are easy to use and can save you a lot of money by telling you what is in your tap water.
Why You Should Get a Home Water Filtration System?
One of the first things you learn in a home water filtration course is how important it is to keep contaminants out of your home. After all, that’s part of what the system is supposed to do. But, even after you have had your initial testing done, you still may not be completely sure about what levels you need to be concerned about. If you’re like most people, you do your own testing and then make some decisions about which type of home water filtration system might suit your needs best. Then you begin to look for the system that will do those things best at a price that you can afford. There are many different options available to you.
If you want to get the absolute best results possible from your water filtration, then you should consider getting one installed in your home. There are a variety of different types available, so take a look at what’s out there before making a decision. The great thing about most of these systems is that they do all of the work for you. In other words, you don’t have to be an expert to know which system would be best for your family’s water filtration needs.
If you want to get the absolute best results possible from your water filtration system, then you should consider getting one installed in your home. There are a variety of different types available, so take a look at what’s out there before making a decision. The great thing about most of these systems is that they do all of the work for you. In other words, you don’t have to be an expert to know which system would be best for your family’s water filtration needs. But if you can get some advice or educate yourself on water filtration, it would be better for you than paying for a system that does a lot of extra work for you.
When it comes to making sure that your water is clean, there is no better solution than using a system that filters all of the water in your home. This way, you can rest easy knowing that all of the harmful germs and other contaminants in water have been filtered out. It is a good idea to have a water filtration system installed by your local plumber, as it will be more affordable than buying bottled water. Plus, you can trust that you are protecting the water that you and your family are drinking. Of course, there is also a lot of research that has been done into the various different water filtration systems that are available on the market today. This way, you can make an educated decision about what type of system would be best for your home.
There are many benefits when you use a home purification system for your drinking water. For example, if you are a smoker, you may want to think twice about where you purchase your cigarettes from. In many areas, the air is full of second hand smoke. If you are exposed to cigarette smoke on a regular basis, you may find that certain cancers and other health problems can develop over time. Therefore, with a system like this, you will feel safe in knowing that your children and other family members are not being exposed to harmful materials.
When it comes to making sure that your drinking water is clean, you have a number of options. However, in addition to purchasing a water filtration system, you may also want to think about investing in a purifier for your showerhead. Even if you do not need one right now, they are a great option for the future. After all, we are all exposed to toxins every day, and sometimes they need to be broken down and removed from our bodies.
What are the benefits of drinking filtered water over untreated tap water?
What are the benefits of drinking filtered water over untreated tap water? It’s really simple. There are fewer contaminants in bottled water than in tap water, and some of the contaminants aren’t even real pollutants. The only real threat is that some contaminants may be cancer causing. So, filtering the water is a step towards prevention and a healthy lifestyle.
A lot of people have started buying bottles because they taste so much better than tap water. And some people drink bottled water just to avoid the taste. But, there is more to it than that. Tap water contains chlorine, which can make the taste unpleasant. Filtered water removes this, too, without affecting the taste at all.
The filter also removes lead, which is particularly harmful to young children. Children are particularly vulnerable to lead poisoning. So, filter the water to keep them safe. Just as importantly, you will improve your health overall. It will reduce or eliminate many health problems, including:
Heart disease is very common among people today. But, the number of heart disease victims has been on the rise for quite some time. Drinking tap water every day increases your risk of developing these conditions. Filters remove these traces of Lead and other contaminants from your water, thereby lowering your risk. So, it becomes clear that a home water filter system is an important investment.
You need to know what are the benefits of drinking filtered water over untreated tap water, though. To begin with, drinking water that is purified improves your health. It reduces or eliminates the harmful bacteria and viruses in it. This reduces, if not completely eliminates the body’s need for antibiotics! In addition, most of the impurities are removed.
Of course, this applies only to pure filtered water. Unfiltered water is just as dangerous. Actually, you will probably be more prone to diseases if you consume unfiltered tap water, since it will lack essential minerals and nutrients. Some of the harmful elements found in untreated tap water include: Chlorine, Mercury, Potassium, Magnesium, And trace amounts of other chemicals and pollutants.
So, filtering your own water ensures that you get the most benefit from your investment. There are many different types of filters available on the market. Depending on your needs, you can choose the one that fits your lifestyle best.
Filtered drinking water can save you money and health problems. What are the benefits of drinking water with a carbon filter? Well, if you want to be healthier, you should definitely consider filtering your own water. You can filter your own water using carbon or charcoal filters, reverse osmosis or carbon absorption filters. For more information, visit the Web site below.
Filters like the popular Brita Carbon block or the PUR filtration system are available at your local store. Or, there are online sites where you can order them. If you want to drink purified water straight from the source, there is another option. That’s by installing a water purification system at your home. The Purify Water System from PUR is made of activated carbon and has two filters: a carbon absorber and a sub-micron filter.
When activated carbon is used, it traps the chlorine and other contaminants in the water, while allowing the healthy, natural mineral content of tap water through. The sub-micron filter helps to remove parasitic cysts, heavy metals, VOCs, pesticides, herbicides and other dangerous chemicals from your water. Unlike reverse osmosis filters, they don’t remove the essential trace minerals found in tap water. They also don’t remove the healthy nutrients found naturally in most water. These filters are very effective for removing some of the most common contaminants, but the best choice is activated carbon. Other filters may improve the taste and quality of your water, but they will not help you get rid of parasites or cysts in your water.
For many people, there are no health risks from drinking purified water, but some do have certain conditions. People with kidney or heart disease should stay away from activated carbon filters. The filters are also inefficient at removing fungi or bacteria that may be present. Carbon-based filters do tend to leave a residue that can be harmful to your health.
Whatever your reason for filtering your own water, it is important to do your research and find the system that is right for you. There are benefits to both bottled and treated water. The only difference is in cost and convenience. If you live in a remote area and can not access a filtering system, your safest option is to filter your own tap water. It is easy and inexpensive, and can save you money in the long run.
How do filters work to make your tap water taste better?
In the United States we are constantly being told that the water that is coming from our tap is bad and must be avoided. It is said to contain a number of pollutants that are harmful to our bodies. It is also said that this water is untested and that there may be some level of chemicals that have been added. This article will discuss on the ways in which this can be done.
It is believed that these chemicals found in our water come from many sources. It is said that many pharmaceuticals, industrial waste, pharmaceutical drugs and herbicides have been found in drinking water. This is not always the case as there are many sources that state that they do not use any hazardous chemicals in the water. Some cities have stated that they are unaware of these chemicals having been found in the water.
There are many reasons why this occurs. The main reason is that the treatment plant does not remove all the chemicals from the tap water. This happens because the regulations require that they be removed at the source and then disposed of properly. One of the reasons for this is that they contain hazardous materials that can be dangerous to humans when swallowed.
Filters have been used for quite some time. This was the first step in removing chemicals in water. This was necessary so that you could have clean drinking water. Now you can get a filter that will help to improve the taste of your water. When you get the right filter, you can be assured that your tap water will feel and look better.
There are several different types of filters. You have the point of use filters that are very common. These are filters that you can place directly on your faucet. When the water flows through the filter it catches the chemicals and puts them in a storage tank. As the water passes through the storage tank the chemicals break down. It will be removed from your water and then you will get purified water.
There are some filters that use chlorine to remove the bad tastes in your water. This is the most popularly used type of filter in homes. This is because chlorine is thought to have a disinfectant effect on water. So when you add chlorine to your water it is supposed to kill the bacteria in your water. It works well in theory, but in practice many people notice that they do not feel any better after using chlorine based water. Some researchers believe that it does not actually kill all the bacteria in your water, just a few of them.
If you want to have nice clear water that tastes good, you need a filter that removes chlorine and does not add any other chemicals to your water. You will find that there are many different filters on the market that do this. You will also find that there are many different manufacturers. Your best bet for choosing the right filter is to read the information that is included with it. Most companies will give you an amount of water that you should try before you buy.
How do filters work to make your tap water taste better? They make it taste so much better. But, before you buy any system, make sure to test it first. That way you can see if the water that comes out of your tap is really pure water. You do not want to get water that is contaminated with anything, do you?
Brita vs. PUR: Water Faucet Filters & Pitcher Filters
Brita and PUR sell two types of water filters, water faucet filters or pitcher filters.
Water Faucet Filters
Water faucet filters can be mounted directly to the kitchen faucets or any other water outlets in the house. This allows for convenient drinking water.
Pros & Cons
Pros
The filter media removes harmful chemicals and dissolved minerals from tap water. The filter can also remove unusual tastes and odors.
Faucet filters are a great option for those who value convenience. These filters are also a good investment for those who don’t like the taste of the chlorinated, mineral-laden water coming directly from the treatment plants.
Cons
However, you should be aware of the potential disadvantages of water faucet filter.
They are expensive to maintain. Faucet filters are more susceptible to wear than pitcher-mounted counterparts. Brita Longlast pitcher filters can last for more than six months, but Brita Faucet Mount filters have a maximum life span of just four months. It is not unusual for the annual maintenance costs of a single faucet mounted filtering unit to exceed $70-100.
The contact time between the filtering unit and water is extremely short because it is small. This means that filtration is not as efficient as it would be with larger filtering units like pitcher filters.
Single-stage activated charcoal filters are used in faucet filters. This type is also known as “solid carbon filter” and requires high water pressure. The faucet won’t work if the pressure is too low. Water cannot push through the filter media, and it will not let you get water.
The most important thing is that faucet filters perform differently from one model to the next. Although many models are capable of removing dissolved minerals, germs and other contaminants, not all models will be able remove the taste and odor of water. Before you buy, make sure to read the fine print and product description.
Pitcher Filters
Instead of being mounted on the kitchen faucet, pitcher filters are placed on top of water containers. The core filter filters out contaminants from water that is not filtered. Water is then poured into the inlet. Depending on the amount of water that is being poured into the pitcher, the filtering process may take from a few seconds up to several minutes.
Granular Activated Carbon is the most common filter technology used in pitcher filters. Granular Activated Carbon (GAC) is a filter that traps large particles and stops them from passing through the filter. Activated carbon absorbs any contaminants such as chlorine, mercury, lead, and other harmful substances that it comes in contact with.
Pros & Cons
Pros
A pitcher filter has the greatest advantage: It filters water more efficiently than smaller tap-mounted units. The longer, more durable filter media can have a greater contact time with water and traps more chemicals and debris. It is also more effective in removing bad tastes and odors from water because it has a longer “steep period”.
GAC filters do not require high water pressure as the solid-state faucet filter. The filter will function by the gravity of water that is poured into the inlet.
A pitcher filter doesn’t require installation. You can immediately use the filter cartridge by inserting it into the compartment in the pitcher.
A pitcher filter has a cost benefit. The majority of people only use the pitcher filter for drinking water. This is in contrast to faucet-mounted filters that have to be used for other purposes. This type of filter is more durable and requires less maintenance.
This is a great option if you are on a tight budget or want to improve your filtering abilities at home.
Cons
The water capacity of a pitcher filter is very limited. The majority of models can hold between 8 and 10 cups of water. After the water runs out, refill the pitcher with water and wait for 15 minutes for the filter’s reprocessing to take place. This filter is most annoying because of the wait time between each filling.
GAC filters are very effective at first, but they can quickly lose their effectiveness. After a few months, water can make a direct channel through the activated carbon granules and render the filter ineffective. GAC filters can collect organic material and bacteria even if they aren’t used often. They must be replaced or chemically treated in this instance.
A pitcher filter should be changed on average every three months.
All You Need to Know About PUR Filters
Brita currently offers two universal filters in its portfolio: the Brita Longlast and the Brita Standard. Brita-branded pitchers or dispensers can accept either one of these filters.
The Longlast and the Standard are identical in design. Both use Granular Activated Carbon tech (GAC) and ion exchange resin beads. However, their performance and longevity is different.
Brita Stream is a third model of filter that is compatible only with products from the Stream range. It is a single-stage activated charcoal filter, which is typically found in faucet filters. This filter requires high pressure to pass any water.
The Brita Stream filter was not made for intensive filtering. It can only remove basic chemicals such as chlorine and some particulates.
Faucet Mount filters are the fourth and final major Brita filter type. It is a single-stage activated charcoal filter, just like all other faucet filters. The Faucet Mount functions the same as the Brita stream, but has a significantly higher filtering performance. It is actually the most efficient Brita filter currently available, as you can see.
Brita filters have been certified and tested by the National Science Foundation (NSF), and the Water Quality Association, (WQA).
1. What Does PUR Filter Out?
The table below will show you the types of contaminants that each filter can remove.
The main reason tap water has an unpleasant taste and disconcerting smell is because of the chlorine. Brita filters are capable of removing chlorine. If you want to improve the taste of your water, any of the Brita filters will work.
Brita Standard is the best option in this situation since it is the most affordable. If you don’t need heavy-duty filtration, then there is no reason to spend on expensive models such as the Longlast. For situations where you will be utilizing all the benefits of these filters, the larger filters should be reserved.
It’s obvious that neither the Brita Standard or the Brita stream are well-equipped to eliminate contaminants. Brita Faucet Mount and Brita Longlast are the only options if you need a water filter to remove contaminants from your water supply.
2. PUR Water Filter Systems
Water filtering pitchers
Brita currently offers about 12 different models of pitchers. Most of the models are similar in aesthetics, depending on how you view them. Although one model might use a different filter, all of them work in the same way. When shopping for filters, there are only two things you need to remember: first choose the type you prefer and then select the most appealing one that suits your needs.
The Brita Everyday pitcher (10-cup), is the most in demand at the time of writing. The pitcher comes with a Longlast filter. After the Longlast filter is used up, you can get a Standard filter. The pitcher can accept both Longlast and Standard filters.
The Brita Standard Metro (10 cup) is a more affordable option. The Brita Standard Metro (10-cup) accepts either a Longlast or Standard filter. However, it costs only $15. If you have a limited budget, this would be your best option.
Faucet-Mounted filters
Brita has one series of faucet-mounted filters, Brita Basic. However, there are two unofficial variants: the normal (which doesn’t have an official name) and Complete.
The Brita Basic is a basic water filtration unit. There are two settings available: one for drinking water and another for other purposes. The unit has a filter-change indicator that tells you when the filter needs to be replaced.
The Brita Complete Basic is a second variant, but more expensive. It offers many additional features. You can choose from three spray options: regular stream unfiltered water (filtered), regular stream filtered, or unfiltered spray. You can use the extra unfiltered spray setting to wash dishes.
The Complete model has an electronic filter-change indicator. This is different from the Basic, which has a mechanical indicator. The LED light will flash when the filter is done being replaced.
These minor differences aside, the filtering performance of both models is identical. Both models use the same filter type. It all comes down to personal preference, and how much you are willing to spend.
However, past buyers have stated that the additional features of the Complete model are too small to justify the extra cost. In most cases, however, the basic Basic model will suffice.
3. How Long Do PUR Filters Last?
Brita is far more long-lasting than PUR or any other company in terms of longevity.
For example, the Brita Longlast can last for six months or, more precisely, 120 gallons. One replacement filter can cost you about $17. That’s not bad considering it can last for half a year.
Brita’s premium product, the Brita Faucet Mount Filter, lasts approximately four months and costs $19 to replace. Although it is slower and more costly, some people consider the extra convenience and improved filtering abilities to be worth the cost.
Brita Standard and Brita stream, the company’s entry-level products, cost $7 each. This is less than half of the Longlast or Faucet Mount. They also have shorter service life. The Standard and Stream can be used for approximately two to three months or 40 gallons of drinking water before they need to be disposed.
All You Need to Know About Brita Filters
Brita offers four types of filters. PUR, however, only offers three: the PUR Basic Filter and the PUR Lead Reducing filter.
Important to know that the PUR Basic filter has two versions: one for pitchers, and one for faucet mounted filtering systems. The MineralClear works only with faucets, while the PUR Lead Reducing filter is exclusive to pitchers. Overall, there are three types of filters, although you can choose from two different types for each system.
Maxion Filter Technology is used to build PUR filters. Although they don’t cover the technical details of the filter technology, the manual states that it is a unique blend of GAC filtering tech with ion-exchange resin beads.
All PUR filters have been certified by the WQA to filter out both common chemicals such as chlorine and more dangerous chemicals like mercury or pesticides. The Lead Reducing filter can deal with lead contamination much more effectively than the Basic or MineralClear filters, as its name implies.
MineralClear can also deal with heavy water, which is water that contains a high level of dissolved minerals.
The Basic is a comprehensive system that can clean most chemicals, but it isn’t better than any other.
1. What Does Brita Filter Out?
Below is a list of the most notable chemicals each PUR filter model can handle.
PUR is clearly superior to Brita in terms of filtration. The PUR Basic, the most expensive filter, can remove most of the notable chemicals. Lead is the exception. You can use the MineralClear Filter or PUR Lead Reducing Filter to determine if your water supply has been contaminated with lead.
It is much easier to choose a PUR filter. It is important to consider whether lead reduction is an important concern for the water supply. If you don’t, the Basic filter won’t be able to significantly improve your water quality.
All three filters can remove chlorine and improve your water quality. The MineralClear is able to remove dissolved minerals more effectively than the two other filters, so it’s the best choice if you want better tasting water.
2. Brita Water Filter Systems
Water filtering pitchers
PUR has produced many water-filtering pitchers over the years, much like Brita. According to their top-selling charts the PUR Ultimate Filtration water filter pitcher (7-cup) is their most-popular. It’s affordable, has a nice design, and good filtering power. This pitcher is a great option if you are interested in PUR’s hardware.
The company also offers an 11-cup version if the 7-cup capacity seems a little too small. This pitcher has an extra large volume and a digital LED filter indicator. The light will blink when the filter has reached its end of service life. All of this comes at an additional cost.
Faucet-Mounted filters
Brita’s faucet-mount filter offerings are not as innovative as those offered by PUR. Brita offers two models that have very minor differences, but PUR has more models and clearer price/feature tiers.
The PUR PFM400H Faucet filter is one of the most in-demand PUR faucet filters. Although it isn’t as inexpensive as other faucet filters, many people have decided to go for it. Its mostly positive reviews are a good indicator that it can live up to your expectations.
PUR is open to trying new technology, which is what sets them apart from Brita. The filtering unit has integrated smart sensors as well as a Bluetooth module, which allows it to connect with your smartphone. An app allows you to monitor the water consumption of the filter and its status.
3. How Long Do Brita Filters Last?
Although PUR filters are more efficient, they do not last as long as Brita filters. The PUR Basic and PUR Lead Reducing filters can filter approximately 40 gallons water for about 2 months.
This is roughly the same time as you’d get with Brita’s entry-level filters such as the Brita Standard or Brita Stream.
Even the PUR MineralClear filter, which can last the longest of the trio, can only provide approximately 3 months of heavy usage (roughly 100 gallons).
Replacement filters are priced about the same as Brita’s. PUR Basic replacement filters are available for around $11-$12 per piece. For $25, you can buy three Lead Reducing filters in a pack. A two-pack of PUR MineralClear filters will cost you about $20.
PUR water filters are more costly to maintain because they don’t last as long as Brita’s filters. However, many people find the higher filtering power that PUR provides to be worth the additional cost. If you value filtering performance more than anything else, you should seriously think about investing in a PUR System.
Brita vs. PUR: Which One Should You Choose?
Why choose PUR?
PUR is known for its exceptional filtering performance. PUR’s basic filter, the appropriately-named PUR Basic, can remove far more contaminants and particles than Brita top-of-the line filters. PUR is the best water-filtering system.
However, higher performance comes with a real cost. PUR filters are more expensive and require replacement filters. PUR filters are less durable than Brita filters, which is something that can’t be ignored.
PUR replacement filters are notoriously hard to find. It may be necessary to search online for the model and replacement parts you are looking for.
It is clear that PUR is the best option if you value performance above all else, and are prepared to invest the time and money necessary to achieve it.
Why choose Brita?
Brita is both affordable and long-lasting. Brita’s water filtering systems (pitchers, faucets, and all other parts) are much cheaper than their PUR counterparts. PUR spare filters can also be replaced at a lower price than replacement filters.
Brita also has a greater reach than PUR. They can be found in most brick-and-mortar hardware stores. It takes only a few keystrokes to search online for their products.
Although it does not have the same filtering capabilities as PUR, it is still a good option. Brita is the better option if you are shopping for something that will last a long time and on a tight budget.
The best way to choose which type of system for you home based on your needs
The best way to choose which type of system for you home based on your needs and your location is to educate yourself. If you have been thinking about making a change and are not sure what to do there are many choices and you should try out all of them. You might discover that some of them are a better fit for your lifestyle. Once you have narrowed down your choices then you can make a final decision.
One of the easiest ways to get an idea of what type of system you would want to use in your home is by looking at the information available online. There are many web sites that can give you a pretty good idea of which type of equipment is best for you. The solar industry is actually booming in this day and age and a solar home may be just what you are looking for. You can also do some comparison shopping on the internet.
When you do some comparison shopping, it is important to find out how much you will be spending each month to use this equipment. You may want to look at a few different systems and see what they have to offer in terms of price and overall efficiency. The best way to choose which type of system for you home based on your needs and your location is to do the research ahead of time and to think carefully about what your budget will allow for.
If you know what you want you will be able to do more research and you may find the best one for you right off the bat. But if you do not know what you want or what you need then it will be more difficult for you to make a proper decision. Just spend some time doing research. The best way to choose which type of system for you home based on your needs and your location is to research ahead of time and to figure out what you need before you go out and shop.
Once you have figured out which options you want then it is time to do the research. Do not go ahead and buy the first panel that you see or the first system that you find. There is plenty of information out there on solar energy. You can find out all the pros and cons of each option. The best way to choose the system that is right for you is to do the research. Spend some time online reading about the different options that are available and finding out everything you can about each one.
When you are choosing a solar system, it is best to choose one that is simple. The more complex the better. The less complication you have with the system the more benefits you will receive. The best way to choose the best system for you is to research and find out as much information as you can. This will ensure that you are choosing the best option available to you. Take your time and figure out the pros and cons of each system so that you can make an educated decision before you buy.
There are many things to keep in mind when it comes to choosing a solar energy system. You should learn as much about each option as possible before you decide. Take the time to compare each system and to look at the pros and cons of each. You may also want to consider having someone install the system for you. This can help to make sure that you get the most out of the system and that it is installed properly.
The best way to choose which type of solar energy system for you is to research and learn as much information as you can. This will ensure that you are choosing the best option available to you. Take your time and figure out the pros and cons of each system, then have someone install it for you.
Why should you change your water filter regularly?
Why should you change your water filter regularly? The answer is simple. If you don’t, you could be putting yourself at risk. Many people don’t realize that they can have contaminants in their water supply and not even know about it.
If you are like most people, chances are you think that if you get your water from a local municipality that the municipality works to make sure the water is clean. You might be right. It is their job. However, if you look around you will find out that most municipalities do not test their water for contaminants. They only test the water for bacterial contamination. So if you think that your local municipality is checking the water, think again.
So, the question remains. Why should you change your water filter regularly? Well, one reason is that the contaminants that are in the water are harming you. Others reasons to change filters include protecting your family. If you think that water is safe, you are not considering all of the things that are going on. You also may be taking the easy way out and not doing anything to protect yourself and your family.
Consider the chemicals that are present in our tap water. There are over 4000 different chemicals that have been identified in the water. The problem is, we don’t know what they are doing to us. Therefore, the only way to really know is to install a water filter to remove these contaminants.
You may think that there is nothing to worry about because we are ingesting these chemicals every day. However, that is not always true. These chemicals go into our bodies in different ways. For example, you are breathing them in when you brush your teeth, and they get absorbed through your skin.
When we drink our tap water, the same thing happens. We can ingest these chemicals by drinking the water or by being exposed to them through the skin. As a result, we are getting more sick. In order to stop this from happening to us, we need to change the way we take in and process the water. This is why so many people are wondering the same question that you are.
There is really no reason to not take care of your body on a regular basis. This will prevent illness, disease, and will make you feel better overall. You may not think that you should be changing your water filter on a regular basis. However, if you think about it, that is the best way to stay healthy. You owe it to your body to do what is best for you.
There are a few different options that you have. You can choose to install a filter at your home and use it whenever you want. You can also have a portable water purifier that you bring with you to the office or on vacation. You can even choose to use a filter to drink by means of water bottles throughout your house. Whichever option you choose, just remember to get a good water filter. You need it to be effective for you to get all of the benefits that it can provide you with.
The first reason that you should change your water filter regularly is for the pure amount of water that you are drinking. Do you realize that water that is dirty and has chemicals and other things in it will not have the right amount of vitamins and minerals in it? This is why you need a good water filter. You want to ensure that you are getting all of the nutrition that you need from your water. There is nothing worse than getting sick from drinking water that is not clean.
The second reason to change your filters regularly is because it helps to eliminate the bacteria and germs that can cause sickness in your body. Think about it, we all know that water that is unfiltered and impure is going to be full of bacteria and germs. This is why you should always think about the amount of chemicals that are being used in your water. Are you drinking water that has been treated with chlorine and other chemicals? If so, then you need to think about putting a good filter on your faucet.
The last reason that you should think about changing your water filters regularly is because it will help to save you money. Think about it, every time you turn on the tap and drink tap water, you are throwing away some money. Do you know what the cost of bottled water is? It is more than $50 a bottle. Think about how much money you are throwing away and make a change for the better.
Conclusion
PUR and Brita are two popular brands of water filters. Which one is better? It depends on what you need from a filter, as both have strengths in different areas. The best choice will depend on your priorities for filtration. For example, if you’re looking for an inexpensive option that can purify the most contaminants out of your tap water, then getting a PUR would be the way to go. If taste is important to you or if it’s more important that lead not leach into your drinking water supply than removing other potential pollutants like chlorine and fluoride, then Brita may be right for you because their filters remove these compounds while still preserving flavor and clarity in tap water even after boiling.
